Clear Resins
02Key performance
60%Elongation at Break
57MPaFlexural Strength
84Shore DHardness
1300cpsViscosity
01
Product overview
概述Clarity approaching acrylic, combined with good UV-ageing resistance so parts resist yellowing. Toughness and impact strength are high enough that clear end parts survive accidental drops.
- Requires a printer with a 385 nm light source.
- Polish finely and apply clear coat after printing to reach full transparency.
03
Applications
应用Acoustic device housingsEyewear framesTransparent end-use parts
04
Technical data
技术参数| Flexural Strength弯曲强度 | 57MPa |
|---|---|
| Flexural Modulus弯曲弹性模量 | 1350MPa |
| Tensile Strength拉伸强度 | 30MPa |
| Tensile Modulus拉伸弹性模量 | 1200MPa |
| Elongation at Break断裂延伸率 | 60% |
| Viscosity粘度 | 1300cps |
| Hardness硬度 | 84Shore D |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
05
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 2–3 s @ 4000–5000 μW/cm² |
| Layer height层厚 | Not provided |
| Post-cure后固化 | Polish and clear-coat |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
06 / RELATED
Other materials in this family
XRESIN · Sales & engineering
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.