Clear Resins
02Key performance
40MPaFlexural Strength
26%Elongation at Break
28J/mImpact Strength
84Shore DHardness
01
Product overview
概述Developed for 405 nm light sources, this grade resists resin build-up during printing and offers good green strength for a higher success rate. Clarity approaches acrylic, UV-ageing resistance limits yellowing, and impact strength keeps transparent end parts intact when dropped.
- Polish finely and apply clear coat after printing to reach full transparency.
03
Applications
应用Acoustic device housingsInternal flow visualisationTransparent demonstration parts
04
Technical data
技术参数| Flexural Strength弯曲强度 | 40MPa |
|---|---|
| Flexural Modulus弯曲弹性模量 | 1500MPa |
| Tensile Strength拉伸强度 | 35MPa |
| Tensile Modulus拉伸弹性模量 | 1000MPa |
| Elongation at Break断裂延伸率 | 26% |
| Impact Strength冲击强度 | 28J/m |
| Viscosity粘度 | 1000cps |
| Hardness硬度 | 84Shore D |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
05
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 2–3 s @ 4000–5000 μW/cm² |
| Layer height层厚 | Not provided |
| Post-cure后固化 | Polish and clear-coat |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
06 / RELATED
Other materials in this family
XRESIN · Sales & engineering
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.