Elastomer Resins
02Key performance
226%Elongation at Break
71Shore AHardness
80%Compression Recovery
1.10g/cm³Liquid Density
01
Product overview
概述A two-part photopolymer elastomer with excellent rebound for 3D printed elastic footwear, slides, insoles, midsoles and saddles. The two-component system delivers a better balance between rebound and compression set than single-part grades, with high elongation and a softer Shore A feel.
- Mix parts A and B in the specified ratio and use within the working life after mixing.
03
Applications
应用Elastic footwear & slidesInsoles, midsoles, saddlesCushioning parts
04
Technical data
技术参数| Hardness硬度 | 71Shore A |
|---|---|
| Viscosity粘度 | 3200 @25 °Ccps |
| Liquid Density液体密度 | 1.10g/cm³ |
| Tensile Strength拉伸强度 | 10MPa |
| Elongation at Break断裂延伸率 | 226% |
| Flex Fatigue曲挠次数 | 85 000cycles |
| Compression Recovery压缩弹性 | 80% |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
05
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 未随资料提供 |
| Layer height层厚 | Not provided |
| Post-cure后固化 | Not provided |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
06 / RELATED
Other materials in this family
XRESIN · Sales & engineering
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.