Product overview
概述A standard model resin that separates itself from generic rigid grades on strength: where most consumer rigid resins reach only 30–35 MPa in tension, this grade reaches 50 MPa. Printability is equally considered — supports can be finer, saving material, and motion speeds can be higher. Heat resistance is the third difference: most consumer rigid resins deform near 40 °C, while this resin holds to a 65 °C HDT.
Applications
应用Technical data
技术参数| Tensile Strength拉伸强度 | 50MPa |
|---|---|
| Tensile Modulus拉伸弹性模量 | 3000MPa |
| Flexural Strength弯曲强度 | 105MPa |
| Flexural Modulus弯曲弹性模量 | 2500MPa |
| Impact Strength冲击强度 | 26J/m |
| HDT热变形温度 HDT | 65@0.45 MPa |
| Viscosity粘度 | 360cps |
| Hardness硬度 | 85Shore D |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 2–3 s @ 4000–5000 μW/cm² |
| Layer height层厚 | Not provided |
| Post-cure后固化 | Not provided |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
Other materials in this family
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.