Water-Washable Resins
02Key performance
30%Elongation at Break
30J/mImpact Strength
50°CHDT
81Shore DHardness
01
Product overview
概述Like the 8K grade, this resin cleans with water instead of IPA, prints easily and keeps odour low. It trades a little stiffness for toughness — 30% elongation at break and 30 J/m impact — which suits auxiliary tooling and display pieces that see handling.
03
Applications
应用Laboratory test fixturesDisplay figuresTemporary jigs & fixtures
04
Technical data
技术参数| Tensile Strength拉伸强度 | 32MPa |
|---|---|
| Tensile Modulus拉伸弹性模量 | 1300MPa |
| Elongation at Break断裂延伸率 | 30% |
| Impact Strength冲击强度 | 30J/m |
| HDT热变形温度 HDT | 50@0.45 MPa |
| Viscosity粘度 | 340cps |
| Hardness硬度 | 81Shore D |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
05
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 2–3 s @ 4000–5000 μW/cm² |
| Layer height层厚 | Not provided |
| Post-cure后固化 | Not provided |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
06 / RELATED
Other materials in this family
XRESIN · Sales & engineering
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.