Product overview
概述A castable white wax with excellent burnout behaviour — no special investment plaster required, it can be cast in the same furnace cycle as conventional wax patterns. Detail reproduction is very high, so complex designs are practical, and the low-viscosity, near-odourless formula places no harsh demands on equipment or workspace.
- If the printer is not used frequently, decant the resin after printing to prevent moisture pickup.
- Post-cure with a high-power mercury lamp, fully submerged in water.
Applications
应用Technical data
技术参数| Burnout Temperature燃尽温度 | 750°C |
|---|---|
| Ash Content灰分值 | < 0.1% |
| Viscosity粘度 | 200cps |
| Flexural Modulus弯曲弹性模量 | 1500MPa |
Values above are the ones documented in our internal data. Nothing is extrapolated. Formal test conditions and standards are stated in the TDS.
Printing & post-processing
工艺| Light source适配光源 | 385–405nm LCD / DLP |
|---|---|
| Exposure曝光 | 5–8 s @ 4000–5000 μW/cm² |
| Layer height层厚 | Not provided |
| Post-cure后固化 | High-power mercury lamp, fully submerged |
Layer height and exposure depend on machine intensity, resin temperature and cross-section; parameters not listed are not recommended.
Other materials in this family
Need a material recommendation, or a sample?
Tell us the service conditions, your printer and the target properties. We will come back with a material recommendation and a starting process window.